Setting up a Canon printer can seem a bit confusing for those doing it for the first time. The process can indeed feel long and complicated. However, when you follow the proper steps in the right manner, you'll undoubtedly be able to set it up and use it. This article will tell you in detail about the whole process of installing a Canon printer through Canon IJ setup. You will know the setup procedure for a wired and wireless connection for Windows and Mac operating systems. 

What are the Prerequisites to Canon IJ Setup?

 There are certain things that you should take care of before proceeding with the setup process. They are as follows. 

• Keep your printer's model number in hand before beginning the setup process.
• Make sure that the printing device is properly plugged into the power outlet.
• Ensure that the device has adequate storage for the driver installation.
• Ensure that the device has a good internet connection.

Canon IJ Setup Guide for Windows

 Follow this setup guide to set up your Canon printer on the Windows operating system wirelessly. Follow the instructions carefully to get the best results. 

• Start by downloading and installing the driver from Canon com setup.
• Switch on the printer and see that it's plugged with the power switch.
• Then, open the file of the driver setup and keep tapping 'Next' till you notice the screen where there's a choice of selecting 'Wireless Setup.'
• After choosing this option, navigate to your printer screen. Click the Wi-Fi setup button.
• Choose the device' Settings.' Tap 'OK.'
• Navigate to 'LAN Settings.' Press' OK.'
• Select 'Wireless LAN Setup' and tap 'OK.' The printer will begin searching for an access point.
• Ensure that the Wi-Fi router is switched on. You will notice a Wi-Fi flash lamp blinking.
• Now choose your Wi-Fi network from the network list that appears on the screen. Tap 'OK.'
• Input your password and tap 'OK.'
• In a few moments after your printer connects to the Wi-Fi, the process of Canon IJ wireless will complete.

The Process to Setup Canon IJ Printer on Windows through USB

 For setting up the Canon IJ printer through USB, you first need to download the driver and install it. Then follow these steps. 

• Connect your Windows system and printer to a USB cable.
• Launch the 'Control Panel.'
• Choose the option of 'Devices and Printers.' You'll notice your printing device having a green checkmark.
• If you don't find it, tap 'Add printer' for adding it manually.
• Now your printer is ready to be used by you.

What are the Steps for Canon IJ Setup on Mac?

 You can accomplish the IJ setup on Mac by navigating to canon.com/ijsetup to download and set up the driver. Now follow these steps. 

• Ensure that your Canon printer is on and your device is on a single Wi-Fi network.
• On the 'Apple' menu, tap 'System Preferences.'
• Tap on 'Printers and scanners.'
• Tap on the + sign near the screen's bottom-left corner. You'll see a pop window.
• You'll be able to view the name of your printer in the left-hand pane if it's connected. Tap on it to start the setup process.
• After the completion of the setup process, you will see your printer getting displayed with a green check. It's now ready to use. 

Final Words

By adhering to the points in this article, you can efficiently execute the whole Canon IJ setup by yourself. You can set it up wirelessly and through a USB on Windows. Mac users also shouldn't find any difficulty in setting up the printer. But if you get stuck somewhere, connect with customer support technicians of Canon printer. REF Link: https://www.easyarticles.com/article.php?post=easy-steps-to-set-up-the-canon-printer-via-the-canon-ij-setup

HP printers are high-performance printers that are loved by millions of users worldwide. However, like any technical appliance, its users encounter numerous errors at some point or the other. One of the most commonly occurring issues is that of HP printer offline. The error arises without any specific reason. In this article, you’ll find effective ways to troubleshoot this problematic situation. 

Different Ways to Troubleshoot the HP Printer Offline Error  

 There are multiple troubleshooting ways by which you can successfully resolve this problem. Follow them carefully. 

Ensure That the ‘Use Printer Offline’ Mode Isn’t Selected

 You’ll find your HP printer going offline if you have accidentally selected the ‘Use Printer Offline’ mode. So, make sure that you haven’t selected this option. If you have, then you can go through the steps below to change this setting. 

• Choose the ‘Start’ menu and tap on ‘Settings.’
• Tap on ‘Devices’ and then on ‘Printers and scanners.’
• From the given list of printers, right-tap on your HP printer.
• Now from the menu, untick the ‘Use Printer Offline’ option.

Check that your printing device is set as default.

 If you find that your HP printer keeps going offline on your operating system, you need to set it to default. Follow these instructions. 

• Tap the button of Windows and input ‘Run.’ Input ‘Control Panel’ and press ‘OK.’
• Tap the option of ‘Device and Printer.’ You’ll find your HP printer listed. If there is no green check mark against your printer, then it means you haven’t set it as default. Right-click on it and tap ‘Set as a default printer.’

 Now the issue of HP printer offline won’t bother you.   

Remove the obsolete printer driver version.

 If your printer has a corrupted or outdated driver, it will always display an offline error. Go through these steps to reinstall or update the driver. 

• On your windows, tap ‘Device Manager.’
• Now find the section of ‘Printers’ and locate the model name of your printing device. Right-tap on it and then tap on ‘Update Driver.’
• Now, hit the option of ‘search automatically’ and wait for some time till your printer driver updates.
• After it updates, restart your device.
• If you wish to reinstall the driver, navigate to the control panel and tap on ‘Remove programs.’
• Now uninstall the current HP printer driver. You can easily perform the download of the printer driver from the official HP site and install it.

Fix the printer spooler settings

 HP printer keeps going offline when the spooler issue gets stopped. Follow these steps. 

• Type ‘Services.msc’ on the ‘Run’ dialog box and tap ‘OK.’
• Find the ‘Print Spooler’ option.
• Right-click it and tap ‘Stop.’
• Tap the address bar from the Windows File Explorer. Input C:\Windows\System32\Spool\Printer. Tap ‘OK.’
• Remove all files from the folder of the printer and navigate back to ‘Print Spooler.’ Right-tap it and choose ‘Start’ to begin the spooler service again.
• Now start your system again.

Closing Words

 As you might have discerned, there are a couple of different methods to resolve the HP printer offline error. You can either the ‘Use printer offline’ mode isn’t selected and set your printer as default. Further, you should always update your driver. Contact expert HP printer customer support if the issue persists. Ref Link: https://michaelbraco.imprint.to/post/ways-to-troubleshoot-the-hp-printer-offline-problem-instantlyled

Are you a Brother Printer user? If yes, you must be aware that the Brother printers are one of the best printing devices that can deliver Ultra HD print quality in a short period. However, this gadget can have multiple glitches at the same time, causing great frustration for users. Of all the failures and errors, there is one Brother Printer in an error state issue that is quite common in Windows 10 error state. If you are someone facing a hindrance and looking forward to the solution, continue reading this blog. 

Why do you come across Brother printer in an error state?

 This Brother printer in an error state issue usually occurs when upgrading to Windows 10 due to device incompatibility. This error usually occurs because the printer spool service is blocked with important data. Important data occurs on so many devices that it doesn't work regularly, including graphics, network devices, hard drives, and so on. Therefore, if your printer device encounters an error condition and you are looking for a solution to fix it, follow these ways:  

Process 1: Update your computer's USB driver

 You will need to update your USB driver to get your Brother printer back to what it was before. After installing the driver, restart your computer and see if the error is resolved. If the printer error persists, try the following solutions. 

Process 2: Clear the print task on the Brother printer and start the spool service.

 The print task and spool service could hang with multiple errors and put the printer device in an error state. Therefore, you must restart the service to get the printer back on track. 

Process 3: Use the Windows Troubleshooting Tool to find the problem

 This method will help you identify the Brother Printer error. 

Process 4: Reinstall the driver application

 If you are using an older driver application on your printer device before uninstalling and reinstalling the printer driver, or if the driver is corrupted, such an error can occur on your device. Therefore, you must first uninstall the driver application and then reinstall it. After doing all of the above correctly, restart your computing device and see if the error is resolved. 

Conclusion

 With the four major and most effective ways to quit Brother Printer in error state issue with Windows 10, you can try these methods to solve the problem. Hopefully, the above blog will be useful enough to explain how to handle the printer in the event of an error. If the error persists and cannot be resolved, there may be another internal or hardware problem. In this case, but the system is in the hands of an expert or contact an expert. This will ultimately help in resolving Brother Printer in error state hinderance. 

Ref Link: https://customerhelplineusa.tumblr.com/post/667552102654083072/what-are-the-effective-ways-to-get-rid-of-brother

Over the time, Canon has made a name for itself because of its versatility in all the products manufactured by it, and their printers are no exception. The printers manufactured by them are capable of multiple functionalities and support connection to a variety of operating systems. It is no surprise that you have got yourself a Canon IJ printer, it does simplify your work afterall. However, the initial installation can get a bit tricky. In this blog we will help you set up your device with ease so that you can get it up and running in no time. 

• To start it all, first what you have to do is you have to remove all the tapes and protective material provided for in the printer box.
• After this, connect the power plug to your printer and turn it on, if your printer comes with a display then proceed to choose the language, along with setting date and time.
• Now you can proceed to physically install the print head. To do this, you need to open your printer as per a set of instructions provided, and in the exact same order. This can get a bit tricky so please do watch the video provided for your printer at canon.com ijsetup.
• Next comes, installing the ink. This is comparatively a simple task but it can get messy as there is a chance of spill and wastage. Since we all are aware that ink is expensive and its stains are difficult to remove, we highly recommend that you get this done from someone who is well versed with this or if you want to do it yourself then do get expert guidance from canon ij setup.
• Once all the physical installations are done, proceed to the digital aspect. The first step would be to connect your printer to your system with the help of the USB cable available in the printer box, then will have to load a plain paper on the tray.
• Check your printer screen (if it has one) for the next step. If your printer doesn’t have a screen then check your system for upcoming steps in installation. Read all the instructions carefully and then click on the “Next” button. If you get stuck anywhere, do feel free to contact canon com ijsetup.
• Once all the steps are complete, click on the finish key. Your printer is now set.

Do make sure that you check for the connectivity options that your printer comes with. If there are options of a wireless connection, you can opt for it to get relieved of the hassles of arrangement that a wired connection possesses. Ref Link: https://customerhelplineusa.tumblr.com/post/667279883154653184/tips-and-tricks-to-waltz-through-canon-ij-setup

A common issue that arises when using a brother printer is that sometimes while using it, the printer causes printing problems for you. Even the best of best printers act weird sometimes, like a brother printer in error state. And this happens once in a while and is not something which one needs to be concerned about. This issue is something that can be fixed with the help of simple solutions. The point of this blog is to highlight the things which you can do when your brother printer in error state Windows 10 and is not functioning properly. However, a warning that this is a regular occurrence that happens with printers and is not something that cannot be remedied with the help of your simple methods. Thus, it is suggested that you try to first implement the methods which are given below and apply them to your current situation.

Brother printer in error state

This is something which is a regular concern and has several methods to fix it. The significant aspect is to troubleshoot and locate the cause of concern in the device. Only then will it also become easier to solve the problem as well. One of the initial things to do in a case like this is to ensure first if the printer settings have it placed in an online medium and not an offline medium. Go to the printer device options and afterward change it. This can be done manually too. One can also compare the setup process of the brother printer with the way it has been set up now to check whether it has been done properly, as instructed in the device manual.

Easy steps to solve Brother printer in error state issue

 You can start by checking whether the basics of the printer are in place and if the device has been connected properly. Always make sure the power cords and outlets are working. Further, another thing to check is whether your printer is connected to the internet or Wi-Fi network properly. This can be checked with the assistance of different devices as well. One more of the things which you could do is re-establish the system settings back to their original. Another significant thing that makes a ton of printer glitch in them is usually being at the receiving end of a virus or malware attack. This is the reason it is suggested that an individual puts resources in good antivirus software for this purpose. You likewise need to guarantee that you invest some time trying to identify where the problem is arising out of, and why your brother printer is in an error state.   

Fixing brother printer in error state issue

 Last but not the least, you must make sure to check if all the software updates have been downloaded properly. This is additionally something that one requires to remember while implementing the printer device setup. To prevent concerns from arising at all, make sure you fix your brother printer software updates issue. This is something that will lead you to download the required updates and also need you to keep a track of them generally. Another thing which you can do if none of the above options helped you is that you can always head to the printer website and look at the customers’ discussions on certain basic problems like the brother printer in error state. There are also other alternative remedies such as opting for the customer help numbers of technicians who can fix these issues more technically and professionally. This will help your device locate and easily fix your Brother Printer issue. 

Conclusion

With everyday modernization, printers have become an important part to make the work considerably more agreeable day by day. Nonetheless, as time ahead users likewise face some error codes in printers identified with their equipment and programming. Each time the number of users report experiencing issues like the brother printer in error state. Error state issue occurs in case there is an issue with the actual printer. The printer error state can in like manner happen when the printer is turned on, and the printing paper is in a stuck state. All things considered, you will get a notification on your computer saying “printer is in an error state”. At the point when this error message springs up on your gadget’s screen then you won't be ready to work with the printer. 

Ref Link: https://customerhelplineusa.tumblr.com/post/667003886718042112/how-to-resolve-the-issue-of-the-brother-printer-in

Businesses of all sizes extensively use HP printers. The brand offers best-in-class quality printers. However, there are some minor problems that may arise in this printing device now and then. One of the most common ones is the printer not printing black or dark enough. Many of its users often search for the answer to their question about why their hp printer won’t print black. What’s surprising about this problem is that it arises because of reasons that are quite minor. Users fail to notice them. In this article, you’ll find out all the probable causes of this problem and how you can troubleshoot it. 

 Why Does HP Printer Won’t Print Black?

 Most of the time, the printer works fine. But at times, several causes can lead it not to print dark enough. These reasons are mentioned below. 

• Problem with the printhead.
• You have installed the wrong cartridges.
• Problem with printer drivers.
• A problem in paper settings.
• Low ink levels.

 When you know the exact cause behind this issue, it will be easier for you to troubleshoot. 

What to Do When HP Printer Doesn’t Prints Black?

 Fortunately, there are various methods you can try to fix the hp printer not printing black problem. Some effective ones are given below. 

Clean the device’s printhead

 HP printers having printhead nozzles that are clogged will not print black ink. Therefore, cleaning your printhead will likely resolve the problem. Keep in mind that you'll have to clean a couple of times for the print quality to get appropriately restored. The cleaning process of different HP printer models varies. You can choose the option of a Clean Printhead or Deep Cleaning from the printer maintenance menu on the control panel of your printer. 

Launch the printer troubleshooter

 Windows 10 users can make use of the Printer troubleshooter to resolve this problem. Use it as follows. 

• Input printer in the search bar and then choose ‘Printers & scanners.’
• Choose ‘Troubleshoot your printer.’ Then tap ‘Run the troubleshooter.’
• Select your printer model that is displayed in the window.
• Press ‘Next.’ The troubleshooter will fix the problem.

Use HP Print and Scan Doctor

 HP Print and Scan Doctor can also help you fix this problem. Download it from the official website of HP. 

• After downloading, install it by clicking ‘HPPS.dr.exe.’
• Choose ‘Start’ and select your printer. Now press ‘Next.’
• Choose the option of ‘Fix Printing.’
• You will see the software displaying the wrench icon. It shows that it is fixing something.
• Close the troubleshooter and try to print.
• You can also notice an ‘X’ icon. Continue using the troubleshooter and follow the points it gives to fix the problem.

Wrapping up

Now, whenever you find that your HP printer won’t print black, you will know what to do. Make use of the printer troubleshooter and the HP Print and Scan Doctor to get rid of this problem. If you still cannot resolve this problem, connect with the customer service professionals. 

Ref Link: https://customerhelplineusa.tumblr.com/post/666821939427442689/hp-printer-wont-print-black-ways-to-resolve-it

Many individuals who use Canon printers on a regular basis may run across the “Canon printer is in error” issue. They also seek aid to resolve this vexing situation. To fix these difficulties, you require particular computer and printer skills. 

What can be the possible causes of Canon Printer In Error State?

 The various root causes of 'Canon Printer is in Error State' are as follows: 

• You may have wrongly installed drivers.
• Verify that you have downloaded the correct Canon printer driver and software.
• Canon printer error conditions may also be caused by connectivity difficulties or BIOS issues.
• Maybe the wiring or USB cords are faulty.

How to fix the issue of Canon printer is in error state?

 You can use the following techniques if your Canon printer is in error state. 

Step 1: Check the cables: 

• To begin, you must ensure that your computer and printer are connected properly.
• Second, there are no issues with the wireless network or cable you are utilizing.
• If there is a problem between connections, a robust link must be made.
• Additionally, you must do a test print job before moving on to the next troubleshooting step.

 Step 2: Restart your computer and printer:

At times, the issue might be resolved simply by restarting your devices. Simply switch off your Canon printer and PC and leave them for about one minute. After then, switch them back on to see whether or not the issue has been resolved.

 Step 3: Update or reinstall your printer driver:

The “Canon printer is in error state” problem might also be caused by a defective or incomplete printer driver installation. To fix the problem, just reinstall the drivers: 

• Visit the Canon printer setup webpage.
• Get printer drivers and software.
• Click Download and install the file.
• For installation, open the downloaded file and follow on-screen instructions.
• Click Finish.
• Restart your printer and computer to get better printing.

Conclusion: 

 You may notice that Canon Printer In Error State. The best thing you can do is understand the causes of it and various fixes for the same as described here.

In this blog, we are going to explain the complete process of Canon IJ setup via the Canon.com ij setup. Here we are sharing the process for the wired and wireless connection both for both Windows and Mac operating systems. So, let’s explore them in the easiest way. 

Basic Requirement Before You Start Canon IJ Setup

 Be handy with the model number of your printer before starting with the setup process. Check the storage space of your device that has enough storage space for installing the driver. Check that the printer is plugged in the right way into the power outlet. Ensure that your device has an active internet connection. 

Canon IJ Setup On Windows (Wireless) 

   To start this process first of all you have to download and install the drivers of your printer from ‘Canon.com/ijsetup’. 

• You have to turn your printer on and make sure that it is connected properly with the power switch.
• Thereafter, open the driver setup file that you have downloaded and then click. Then you will be able to see a screen where you see the option of choosing “Wireless Setup”.
• Here you have to choose the wireless option, to do so you have to go to the Canon printer screen and tap on the WiFi setup button.
• Choose the device settings and then you have to click on OK.
• Select Device Settings>LAN Settings >> ‘OK’ button
• Next, move to LAN Settings>Wireless Lan Setup > ‘OK’. Now your printer is ready to search for the access point.
• Ensure that the router connection on the WiFi is turned on. The WiFi light will start blinking on the printer.
• Select your WiFi network from the network list that will appear on the screen and then press OK.
• Now you have to enter WPA/WEP key. Make sure that you have entered the correct password here and press on ‘OK’ button.
• It will take some moment, and here your printer will get connected to a WiFi network.

 Hope the above steps can easily complete Canon ij wireless setup for your Windows system. 

Steps To Check That your Printer is Connected to Your Windows System

   Here are some steps that you can follow to check that your printer is added to your Windows system- 

• Open the ‘control panel’ and then select the ‘device and printer’ option available in your system.
• Check that you are able to see your printer on the next screen with a green checkmark. If not, then you have to do one more process that you need to add manually by clicking on the ‘Add printer’ option.
• Then you can see the list of all available printers, Now, choose your Canon printer from the given list.
• Press the next button, then wait for some time and then you will find that your printer is added.
• After adding that, you will see your printer added with a green checkmark.

Steps to setup Canon ij printer on Windows with the help of USB 

 Here I am going to share some steps that you can follow to do the  Canon IJ setup on Windows using USB: 

• First of all, download the Canon printer driver & wait to finish the installation process.
• Then you have to connect the printer and Windows system with a USB Cable.
• Open the ‘Control panel’ using the ‘Run’ command dialogue box from the windows search option.
• Select the ‘Devices and Printers option for the given list. Now you will be able to see the printer with a Green check-mark.
• If you unable to see the printer, then you have to click on the option of ‘Add printer’ to add it manually.

 Here is the last step and now your printer will be added and ready for use. 

Steps For Canon IJ setup Printer on Mac using https://canon.com/ijsetup

• First of all, you have to download and set up the driver using canon com ijsetup and follow the instructions given on the screen.
• Put your canon printer on the same WiFi network as your device using the same above mentioned steps.
• Next, you have to open the ‘Apple’ menu and then select the ‘System Preferences.
• Select the printer icon on your screen named “Printers and scanners” from the System preferences window.
• Select the “+” available at the bottom left corner of the screen then a pop window will appear.
• Then you will find the printer’s name in the left-hand of the screen which is already connected over the network. Click on it, then you will be able to begin the setup process.
• When the process gets completed then your printer will be displayed with a Green check and will be ready to use.

Wrapping Up:

 Here we have discussed canon IJ setup using Canon.com IJ setup. Hope it helps you to fix help all your setup related issues. If you are unable to do so on your own then you can connect to us we have an expert team who will help you to fix all your issues in just one connection.

Some of the most common causes of mistakes in Canon and Pixma printers are listed below. You may perform 'Canon Pixma printer troubleshooting' based on these Canon printer problems. 

• When the printer's paper feed tray gets blocked with debris, such as dust or crumpled-up pieces of paper, this may happen.
• Incorrectly placed trays may cause Canon Printer Error errors.
• This issue may also arise if we try to print several sheets of paper at the same time.
• If you have a lot of paper in front of the printer, it may also show up on your PC.
• The problem may be caused by worn or unclean line feed.
• The error occurs when a sensor module or in-line input slit malfunctions.
• Pieces of Paper Caught in the Middle of the Paper Highway
• A problem with an old printer driver or network

Fixing Canon printer issues with these tried-and-true methods

 Check out the Canon printer troubleshooting techniques to get your printer up and running again. These can act as Canon Pixma printer troubleshooting. 

Step1:  Start by resetting or restarting the printer.

• The canon Error 6000 may be fixed by restarting or resetting your printer.
• Start by removing the printer's power cord.
• After that, you'll have to enter Pause Mode to put the game on hold. For a short period of time, remain in this frame of mind.
• Connect the printer's power cord to the wall outlet and power it on.
• Then for a little period of time, hold down the power button.
• Then click twice on the Stop button to end the process.
• This should be done one more time to ensure accuracy. The Power button must be held down and then released once the choice has been executed.
• At this point, you have to press Stop a total of four times.
• Finally, check to see whether the issue persists.

Step 2: Proper cable connection 

 Double-check that the power cable is correctly connected to the wall socket in your home or business. Verify that your computer's USB cord is securely attached next. Open the printer's lid and look inside the paper tray to check if there's anything trapped in there. Finally, if for some reason your computer or printer has stopped functioning due to a software problem, restart it and try printing something fresh. 

Step 3: "Add A Printer" option

 Head to the "Control Panel" area of your computer and choose "Printers and Faxes". If your Canon printer does not appear in the list, tap on the "Add A Printer" option. So that your computer runs a test to attempt to identify the printer, follow the on-screen instructions. 

Step 4: Verify whether the test page printed properly

 Next, open the "Properties" or "Options" tab in the Canon printer software on your computer. Select "Test Alignment" or "Clean Print Heads" depending on the program version. Print a test page once the printer has finished aligning itself. If the test page fails to print correctly, contact Canon so that they may discuss repair or replacement alternatives if the printer continues to malfunction. 

Conclusion: 

 Canon printers can give problems by not printing out by getting stuck at some point in time while printing. In such situations, you can implement the tried-and-tested Canon printer troubleshooting methods. Ref Link: https://customerhelplineusa.mystrikingly.com/blog/canon-printer-troubleshooting-how-to-execute-after-finding-the-cause

Brother Inkjet Printers are notorious for having a black cartridge that does not print. For as long as I can remember, Brother printer not printing black has been a regular problem with Brother Inkjet printers. Nobody (even Brother) appears to know why this problem is so prevalent, or why it has plagued Brother printers for so long. In this post, I'd want to start with the primary factors that might create this problem, then go on to the answers.

 It's a common scenario: you need to print something, but your printer's black ink has chosen to go on vacation. You go directly to Google and seek solutions to this problem, and you come across numerous printer forums with no apparent conclusion. We've received calls about Brother printer not printing black as well, so we've compiled a list of things you may try if your printer stops producing in black. 

The Cause of Brother Printer Not Printing Black

Brother Printer not printing black might be caused by a number of factors, including the CISS system, Cartridge, and Breather Tape.If any of these three are malfunctioning, my friend, you will never be able to get your printer to work regularly again. 

CISS system: CISS might be the root of your problem since it causes the printhead to become blocked.

 Using the Horrendous ink: The ink you're using should be good enough to print with. If you don't, you'll have to deal with the problem of your Brother printer, not printing black. 

Using an empty cartridge: When the brother printer tells you that the ink cartridge is going to run out, many people continue to use it, which is fine for a while. Examining Breather's tape: This is a rather common and stupid error that many people make. They neglect to remove the tape, and as a result, the ink stays sealed, resulting in the Brother printer not producing black.

 Purge Pump is inoperable or defective: A malfunctioning purge pump or purge seal is another frequent issue that can cause a printer to cease producing in black or color. 

Data Cable Error: The data cable is often a thin, flat ribbon wire that links the printer's electronics to the printhead. 

If your brother's printer won't print black, follow these steps.

• Confirm that you have removed the Breather tape from the cartridge's top.
• Check to see if the printer has detected the new ink cartridge.
• Run two nozzle cleans on the black print nozzle from your printer's LCD menu. It is recommended that you only utilize the nozzle cleaning method 2-3 times.
• Simply printing a few dark photographs will let you select the best quality photo option. This will give you an indication of whether or not all of the nozzles are operational. This will also aid in pushing the ink out of the nozzle.

 Advanced Repairs: If the problem isn't with the cartridge or the printhead, it's conceivable that it's with the software/printer driver. Changing the paper settings is one solution to the problem. Changing the printer driver settings to "glossy picture paper" may cause the printer to restart printing. This only applies if your printer has two black cartridges, one dye-based and one pigment-based. The kind of black ink used by your printer is generally determined by the paper type used. Pigment black works better on matte paper, whereas dye works best on glossy. We're expecting that by moving from one paper type to the other, we'll be able to trigger or jump-start any of the black cartridges. 

How to Solve Brother Printer Won't Print Black Ink Problems

 Print on a regular basis. 

If you print frequently, there will be a steady flow of ink through the print head, which helps to prevent ink jams at the nozzle. 

Ensure that you only use high-quality generic ink cartridges. 

If you use high-quality generic ink cartridges, your printer will produce high-quality output. 

Do not place the Brother printer in a hot location. 

If you set your printer near a window or in a warm location, ink may congeal within the printhead. Experts recommend that you set your printer in the proper posture. 

Hopefully, these solutions will assist you in resolving the Brother Printer won't print black difficulties you are presently experiencing. 

Ref Link: https://customerhelplineusa.tumblr.com/post/665190497699151872/what-to-do-when-brother-printer-wont-print-black

Canon is among the top printer brands. It is used for both office and home purposes. However, like any machine, printers also get sick. It can be anything from not printing to canon printer in error state windows 10. Thus, we have come up with this guide, which will help you to get rid of the error and fix it immediately. 

Methods To Fix Canon Printer In Error State

 You have struggled when your printer is not working. The reason can be that the canon printer in error state. In that case, you can follow the methods below. 

Method 1: Change Ports Settings

 Launch the run box by pressing Windows+R keys. Here, type “devmgmt.msc”, and press enter. From the windows menu, click on View and then select Show Hidden Devices. Right-click on the Ports (Com & LPT). Select Properties >> Port sharing tab. Select “Use any interrupt assigned to the port”. Next, checkmark “enable legacy plug and play detection.” Click Ok and exit. Now, to check if the issue is resolved, restart your computer. 

Method 2: Change Printer Status To Online

 Head to the control panel. Select devices and printers. Now, select Printer and check the status. If it is offline then, check “use printer online.” As it turns online, a message will appear. 

Method 3: Set Printer Spooler Services Automatic

 Launch the run box by pressing Windows+R keys. Here, type “service.msc”, and press enter. From the table, search for a printer spooler. Right-click and select Start and then click on Properties. Head to the General tab. Set up Startup type >> Automatic. Apply>> Ok and exit. Now, to check if the issue is resolved, restart your computer. 

Method 4: Reinstall Printer Driver

 To reinstall the driver, first, you need to remove the existing driver. For that: Go to the search bar and type Printers and Scanners. Here you will get a list of connected devices. Look for your printer device, click on it. Select Remove Device and click Yes. Reinstall the Printer Driver: Visit canon’s official website. Enter your printer’s credentials. Click on the download button. Double-click on the downloaded file. An install wizard will show up. Follow on-screen instructions to complete the installation. Finally, click Finish. Now restart your computer and the issue is resolved.   Bonus Tip: If nothing of the above works out, you can check your windows updates. Go to Start>> Settings >> Update & Security >>Window Updates >> Check for the update. If updates are available, download and install them. 

Wrapping Up

 We hope your issue with the canon printer in error state windows 10 has been resolved. if you still face the issue, it is recommended to take expert help. You can contact our technical experts providing 24/7 worldwide services. 

Ref Link: https://customerservicephonesupport.blogspot.com/2021/10/here-is-how-to-fix-canon-printer-in.html

Canon Printer troubleshooting is a process where users can identify and get rid of minor or major technical blunders which may appear in the middle of your Printer working procedure. As we like each IT equipment comes up various issues and the same goes with Canon Printer.  This is why we need to connect with some technicians or perform the issue recovering process on our own. If you are who often meet with several common printing problems, then you must go through this online journal as we are going to mention all the necessary information about Canon Printer bugs, so let’s dig all you need to know to find a proper way of removing the basic mess. 

Reliable Methods to Recover Canon Printer not Responding

 Before exploring all the professional paths to fix the Printer glitches, you need to check out some of the causes behind those unwanted troubles. 

Reasons for Canon Printer not responding Error

• There are few problems with your Printer’s ink tank such as incomplete installation, damaged or empty tank cabinet or proper fitting.
• If your Printer is not ready or it responds lately then you will have the same kind of canon printer not responding issue while working and printing your documents.
• When the CD-R tray isn’t set in a proper manner, then users may face numerous messes. Sometimes just because of a damaged printable DVD/CD, try will not work as it needs to. 
• Due to common computer problems, various things will stop users to use a Canon Printer.
• If the printer port is not configured correctly, many blunders take place which will not let you perform the printing practices.
• In the case of opened Inner Cover, you cannot able to print or operate your Canon Printing device.

Now follow these prompts for Canon Printer troubleshooting:   

Apporach1- Default and Basic Way

• Go to the Printer Menu option and open the Properties dialog box and open the Maintenance Tab then click on View Printer Status.
• When the printer status monitor is opened, click on Display Print Queue.
• Click on Cancel All Documents under the Printer Menu
• After displaying a confirmation message on your screen
• Click on Yes and restart your Canon Printer
• Check for the issue and jump to the next solving method if there are some errors still presented.

 Approach2- To Change Printer Port Settings

• Log into your Account with administrator privilege
• Go to Control Panel, open it and click on Hardware and Sound then Printer

 Note: if you use Windows 2000, then open Control Panel then Printers 

• Now make a right-click on Canon xxx Printer icon then jump to the Properties option
• Click on Ports Tab for port settings confirmation
• Ensure the port name, should be as USBnn, where n refers to the number of ports.
• You also can change your settings if there are some mistakes
• Now lookout for the specific problem or contact a team of adepts as per your required concerns.

Additional Ways for Canon Troubleshooting Printer

• First of all, open your printer cover and check the ink lamps, if there is any mess, fix it accordingly. You can click on the Push option and fill in the link if the tank is empty.
• Reset all the Settings of your Conon Printer by following some basic steps.
• Close the Inner Cover then press the OK button and try to work
• Ensure your Printer cable is plugged in properly. Also, check the cable if it is broken or damaged.

The Final Thought- 

 We hope you have finally stored and gathered all the entire information about Canon Printer troubleshooting processes. And you are ready to restart your printing. If you still have any kind of doubts, reach to the professional adepts through a toll-free digit and share all your concerns directly. There is online chat support is also available, you can get best possible and reliable canon troubleshooting printer response here. So call the professionals anytime as they are waiting to guide you from any corner of the globe. Ref Link: http://michaelbraco.full-design.com/Canon-Printer-Troubleshooting-How-to-Perform-the-Quick-Fixes--46343596