Canon printer troubleshooting – how to execute after finding the cause?

Some of the most common causes of mistakes in Canon and Pixma printers are listed below. You may perform 'Canon Pixma printer troubleshooting' based on these Canon printer problems. 

• When the printer's paper feed tray gets blocked with debris, such as dust or crumpled-up pieces of paper, this may happen.
• Incorrectly placed trays may cause Canon Printer Error errors.
• This issue may also arise if we try to print several sheets of paper at the same time.
• If you have a lot of paper in front of the printer, it may also show up on your PC.
• The problem may be caused by worn or unclean line feed.
• The error occurs when a sensor module or in-line input slit malfunctions.
• Pieces of Paper Caught in the Middle of the Paper Highway
• A problem with an old printer driver or network

Fixing Canon printer issues with these tried-and-true methods

 Check out the Canon printer troubleshooting techniques to get your printer up and running again. These can act as Canon Pixma printer troubleshooting. 

Step1:  Start by resetting or restarting the printer.

• The canon Error 6000 may be fixed by restarting or resetting your printer.
• Start by removing the printer's power cord.
• After that, you'll have to enter Pause Mode to put the game on hold. For a short period of time, remain in this frame of mind.
• Connect the printer's power cord to the wall outlet and power it on.
• Then for a little period of time, hold down the power button.
• Then click twice on the Stop button to end the process.
• This should be done one more time to ensure accuracy. The Power button must be held down and then released once the choice has been executed.
• At this point, you have to press Stop a total of four times.
• Finally, check to see whether the issue persists.

Step 2: Proper cable connection 

 Double-check that the power cable is correctly connected to the wall socket in your home or business. Verify that your computer's USB cord is securely attached next. Open the printer's lid and look inside the paper tray to check if there's anything trapped in there. Finally, if for some reason your computer or printer has stopped functioning due to a software problem, restart it and try printing something fresh. 

Step 3: "Add A Printer" option

 Head to the "Control Panel" area of your computer and choose "Printers and Faxes". If your Canon printer does not appear in the list, tap on the "Add A Printer" option. So that your computer runs a test to attempt to identify the printer, follow the on-screen instructions. 

Step 4: Verify whether the test page printed properly

 Next, open the "Properties" or "Options" tab in the Canon printer software on your computer. Select "Test Alignment" or "Clean Print Heads" depending on the program version. Print a test page once the printer has finished aligning itself. If the test page fails to print correctly, contact Canon so that they may discuss repair or replacement alternatives if the printer continues to malfunction. 

Conclusion: 

 Canon printers can give problems by not printing out by getting stuck at some point in time while printing. In such situations, you can implement the tried-and-tested Canon printer troubleshooting methods. Ref Link: https://customerhelplineusa.mystrikingly.com/blog/canon-printer-troubleshooting-how-to-execute-after-finding-the-cause